Motorola XPR 5550 User Manual

indicating the channel is free for you to respond.
Press the PTT button to respond to the call.
The call ends when there is no voice activity for a
predetermined period. The radio returns to the
screen you were on before initiating the call.
The call initiator can press to end the Group
Call.
See Assigning Entries to Programmable Number
Keys on page 306 for more information.
Making Group Calls by Using the Alias Search
Follow the procedure to make any calls by using the
alias search.
1
Press to access the menu.
2
Press or to Contacts. Press to
select.
The display shows the entries in alphabetical
order.
3
Press or to the required subscriber
alias or ID. The first line of the display shows
Phone Number:
. The second line of the display
shows a blinking cursor. Use the keypad to enter a
telephone number.
4
Press to select. If the entry selected is
empty, a negative indicator tone sounds and the
display shows Phone Call Invalid #.
5
Press or to Call Phone and Press
to select. If the access code was not
preconfigured in the Contacts list, the first line of
the display shows Access Code:. The second line
of the display shows a blinking cursor. Enter the
access code and press the button to
proceed. If successful, the DTMF tone sounds.
You hear the dialing tone of the telephone user.
The first line of the display shows the subscriber
alias or ID, and the RSSI icon. The second line of
the display shows Phone Call and the Phone
Call icon. If unsuccessful, a tone sounds and the
display shows Phone Call Failed. Your radio
returns to the Access Code input screen. If the
access code was preconfigured in the Contacts
Capacity Max Operations
41
English

Motorola XPR 5550 Specifications

General

GPS	Yes
Bluetooth	Yes
IP Rating	IP54
Operating Temperature	-30°C to +60°C
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Weight	1.8 kg (4.0 lbs)
Display	Yes, Alphanumeric
Digital Protocol	DMR
Encryption	AES/DES Encryption
Channel Capacity	1000 channels