Motorola XPR 5550 User Manual

Disconnecting from a Bluetooth Device
1
On your radio, press to access the menu.
2
or to Bluetooth and press to
select.
3
or to Devices and press to
select.
4
or to the required device and press
to select.
5
or to Disconnect and press to
select.
Display shows Disconnecting from <Device>.
Your Bluetooth-enabled device may require
additional steps to disconnect. Refer to respective
Bluetooth-enabled device’s user manual.
The radio display shows <Device> Disconnected. A
positive indicator tone sounds and disappears
beside the connected device. The Bluetooth
Connected icon disappears on the status bar.
Switching Audio Route between Internal Radio Speaker
and Bluetooth Device
You can toggle audio routing between internal radio
speaker and external Bluetooth-enabled accessory.
Press the programmed Bluetooth Audio Switch
button.
•
A tone sounds and display shows Route Audio
to Radio.
•
A tone sounds and display shows Route Audio
to Bluetooth.
Viewing Device Details
1
to access the menu.
2
or to Bluetooth and press to
select.
3
or to Devices and press to
select.
Advanced Features in Connect Plus Mode
220
English

Motorola XPR 5550 Specifications

General

GPS	Yes
Bluetooth	Yes
IP Rating	IP54
Operating Temperature	-30°C to +60°C
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Weight	1.8 kg (4.0 lbs)
Display	Yes, Alphanumeric
Digital Protocol	DMR
Encryption	AES/DES Encryption
Channel Capacity	1000 channels