Making Call Alerts by Using the Manual Dial
Follow the procedure to make Call Alerts on your
radio by using the manual dial.
1
Press to access the menu.
2
Press or to Contacts. Press to
select.
3
Press or to Manual Dial. Press
to select.
The display shows a blinking cursor.
4
Enter the subscriber ID and press
to
proceed.
5
Press or to Call Alert. Press
to select.
The display shows Call Alert and the
subscriber alias or ID. The green LED lights up.
6 Wait for acknowledgment.
If the Call Alert acknowledgment is received, the
display shows a positive mini notice.
If the Call Alert acknowledgment is not received,
the display shows a negative mini notice.
Responding to Call Alerts
Follow the procedure to respond to Call Alerts on
your radio.
When you receive a Call Alert:
• A repetitive tone sounds.
• The yellow LED blinks.
• The display shows the notification list listing a Call
Alert with the alias or ID of the calling radio.
Depending on the configuration by your dealer or
system administrator, you can respond to a Call
Alert by doing one of the following:
• Press the PTT button and respond with a
Private Call directly to the caller.
• Press the PTT button to continue normal
talkgroup communication.
The Call Alert is moved to the Missed Call
option at the Call Log menu. You can respond
to the caller from the Missed Called log.
See Notification List on page 123 and Call Log
Features on page 86 for more information.
316
English
To Next Page
Loading...
