7 Repeat Step 4 to Step 6 to delete other entries.
8
Long press to return to the Home screen
after deleting all required aliases or IDs.
Setting Priority for Entries in the Scan List
Follow the procedure to set priorities for entries in the
Scan list on your radio.
1
Press to access the menu.
2
Press or to Scan. Press to
select.
3
Press or to Scan List. Press to
select.
4
Press or to the required alias or ID.
Press
to select.
5
Press or to Edit Priority. Press
to select.
6
Press or to the required priority level.
Press to select.
The display shows a positive mini notice before
returning to the previous screen. The Priority icon
appears on the left of the member alias.
Scan
Your radio cycles through the programmed scan list
for the current channel looking for voice activity when
you start a scan.
Note:
This feature is not applicable in Capacity Plus.
The LED blinks yellow and the scan icon appears on
the status bar.
During a dual-mode scan, if you are on a digital
channel, and your radio locks onto an analog
channel, it automatically switches from digital mode to
analog mode for the duration of the call which is also
true for the reverse.
There are two ways of initiating scan:
Main Channel
Scan (Manual)
Your radio scans all the channels
or groups in your scan list. On
301
English
To Next Page
Loading...
Need help?
General
