Motorola XPR 5550 User Manual

Emergency Operation
An Emergency Alarm is used to indicate a critical
situation. You are able to initiate an Emergency at
any time even when there is activity on the current
channel.
Your dealer can set the duration of a button press for
the programmed Emergency button, except for long
press, which is similar with all other buttons:
Short Press Duration between 0.05 seconds and
0.75 seconds.
Long Press Duration between 1.00 second and
3.75 seconds.
The Emergency button is assigned with the
Emergency On/Off feature. Check with your dealer for
the assigned operation of the Emergency button.
Note:
If short press the Emergency button is
assigned to turn on the Emergency mode,
then long press the Emergency button is
assigned to exit the Emergency mode.
If long press the Emergency button is
assigned to turn on the Emergency mode,
then short press the Emergency button is
assigned to exit the Emergency mode.
Your radio supports three Emergency Alarms:
• Emergency Alarm
• Emergency Alarm with Call
•
Emergency Alarm with Voice to Follow
In addition, each alarm has the following types:
Regular Radio transmits an alarm signal and
shows audio and/or visual indicators.
Silent Radio transmits an alarm signal without
any audio or visual indicators. Radio
receives calls without any sound
through the speaker, until the
programmed hot mic transmission
period is over and/or you press the PTT
button.
Silent
with
Voice
Radio transmits an alarm signal without
any audio or visual indicators, but allow
incoming calls to sound through the
speaker.
Other Systems
317
English

Motorola XPR 5550 Specifications

General

GPS	Yes
Bluetooth	Yes
IP Rating	IP54
Operating Temperature	-30°C to +60°C
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Weight	1.8 kg (4.0 lbs)
Display	Yes, Alphanumeric
Digital Protocol	DMR
Encryption	AES/DES Encryption
Channel Capacity	1000 channels