Motorola XPR 5550 User Manual

or ID. This feature can be assigned to a short or long
programmable button press.
You can ONLY have one alias or ID assigned to a
One Touch Call button. Your radio can have multiple
One Touch Call buttons programmed.
1 Press the programmed One Touch Call button to
make a Private Call to the pre-defined Private Call
alias or ID.
2 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green.
The display shows the Private Call alias or ID.
4 Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
5 Release the PTT button to listen.
When the target radio responds, the LED blinks
green.
If there is no voice activity for a predetermined
period of time, the call ends.
Making a Call with the Programmable Manual Dial
Button
Making a Private Call
1 Press the programmed Manual Dial button to
enter into the Manual Dial screen.
The display shows Number:.
2 Use the keypad to enter a subscriber alias or
Private ID.
3 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
4 Press the PTT button to make the call.
The LED lights up solid green. The Private Call
icon appears in the top right corner. The first text
line shows the subscriber alias. The second text
line displays the call status.
5 Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
6 Release the PTT button to listen.
When the target radio responds, the LED blinks
green.
Making and Receiving Calls in Connect Plus Mode
170
English

Motorola XPR 5550 Specifications

General

GPS	Yes
Bluetooth	Yes
IP Rating	IP54
Operating Temperature	-30°C to +60°C
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Weight	1.8 kg (4.0 lbs)
Display	Yes, Alphanumeric
Digital Protocol	DMR
Encryption	AES/DES Encryption
Channel Capacity	1000 channels