5 Enter the Service Set Identifier (SSID) and press
.
6
Press or to Open and press to
select.
7
Enter the password and press .
The radio displays
to indicate that the
network is successfully saved.
Viewing Details of Network Access Points
Note:
This feature is applicable to XPR 5550e/XPR
5580e only.
Perform the following actions to view details of
network access points.
1
Press to access the menu.
2
Press or to WiFi and press to
select.
3
Press or to Networks and press
to select.
4
Press or to a network access point
and press to select.
5
Press or to View Details and press
to select.
For a connected network access point, the Service
Set Identifier (SSID), Security Mode, Media
Access Control (MAC) address, and Internet
Protocol (IP) address are displayed.
For a non-connected network access point, the
Service Set Identifier (SSID) and Security Mode
are displayed.
Removing Network Access Points
Note:
This feature is applicable to XPR 5550e/XPR
5580e only. Enterprise network access points
that are added via CPS can only be removed
via CPS.
Advanced Features in Connect Plus Mode
227
English
To Next Page
Loading...
