Motorola XPR 5550 User Manual

Note:
Your Bluetooth-enabled device may require
additional steps to disconnect. Refer to
respective user manuals of any Bluetooth-
enabled devices.
Wait for acknowledgment.
• A tone sounds.
•
The display shows <Device> Disconnected and
the Bluetooth Connected icon disappears.
• The disappears beside the connected device.
Switching Audio Route between Internal Radio
Speaker and Bluetooth Device
Follow the procedure to toggle audio routing between
internal radio speaker and external Bluetooth device.
Press the programmed Bluetooth Audio Switch
button.
The display shows one of the following results:
•
A tone sounds. The display shows Route Audio
to Radio.
•
A tone sounds. The display shows Route Audio
to Bluetooth.
Viewing Device Details
Follow the procedure to view the device details on
your radio.
1
Press to access the menu.
2
Press or to Bluetooth. Press to
select.
3
Press or to Devices. Press to
select.
4
Press or to the required device. Press
to select.
5
Press
or to View Details. Press
to select.
Deleting Device Name
You can remove a disconnected device from the list
of Bluetooth-enabled devices.
1
Press to access the menu.
Capacity Max Operations
71
English

Motorola XPR 5550 Specifications

General

GPS	Yes
Bluetooth	Yes
IP Rating	IP54
Operating Temperature	-30°C to +60°C
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz
Weight	1.8 kg (4.0 lbs)
Display	Yes, Alphanumeric
Digital Protocol	DMR
Encryption	AES/DES Encryption
Channel Capacity	1000 channels