Identifying Cable Type
Do the following steps to select the type of cable your
radio uses.
1
Press to access the menu.
2
Press or to Utilities. Press to
select.
3
Press
or to Radio Settings. Press
to select.
4
Press or to Cable Type. Press
to select.
5
The current cable type is indicated by a .
Voice Operating Transmission
The Voice Operating Transmission (VOX) allows you
to initiate a hands-free voice-activated call on a
programmed channel. The radio automatically
transmits, for a programmed period, whenever the
microphone on the VOX-capable accessory detects
voice.
Note:
This feature is not applicable in Citizens Band
channels that are in the same frequency.
You can enable or disable VOX by doing one of the
following:
• Press the PTT button during radio operation to
disable VOX.
• Turn the radio off and then power it on again to
enable VOX.
• Change the channel via the Scroll Up/Down
buttons to enable VOX.
• Change the channel via the Volume/Channel
Knobto enable VOX.
• Turn VOX on or off via the programmed VOX
button or menu to enable or disable VOX.
If the Talk Permit Tone is enabled, use a trigger word
to initiate the call. Wait for the Talk Permit Tone to
finish before speaking clearly into the microphone.
See for more information.
Note:
Turning this feature on or off is limited to
radios with this function enabled. Check with
your dealer or system administrator for more
information.
381
English
To Next Page
Loading...
