• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
The call initiator can press to end the All
Call.
See Assigning Entries to Programmable Number
Keys on page 306 for more information.
Making All Calls by Using the Alias Search
1
Press to access the menu.
2
Press or to Contacts. Press to
select.
The display shows the entries in alphabetical
order.
3
Press or to the required subscriber
alias or ID. The first line of the display shows
Phone Number:. The second line of the display
shows a blinking cursor. Use the keypad to enter a
telephone number.
4
Press to select. If the entry selected is
empty, a negative indicator tone sounds and the
display shows Phone Call Invalid #.
5
Press
or to Call Phone. Press to
select. If the access code was not preconfigured in
the Contacts list, the first line of the display shows
Access Code:. The second line of the display
shows a blinking cursor. Enter the access code
and press the button to proceed. If
successful, the DTMF tone sounds. You hear the
dialing tone of the telephone user. The first line of
the display shows the subscriber alias or ID, and
the RSSI icon. The second line of the display
shows Phone Call and the Phone Call icon. If
unsuccessful, a tone sounds and the display
shows Phone Call Failed. Your radio returns to
the Access Code input screen. If the access code
was preconfigured in the Contacts list, the radio
returns to the screen you were on prior to initiating
the call.
54
English
To Next Page
Loading...
