Motorola XPR 5550

When you press the PTT button while on the
Phone Contacts screen:
•
The first line of the display shows Phone
Number:.
• The second line of the display shows a blinking
cursor.
If the selected entry is empty:
• A negative indicator tone sounds.
•
The display shows Phone Call Invalid #.
4
Press or to Call Phone. Press
to select.
The display shows Access Code: if the access
code was not preconfigured.
5
Enter the access code, and press
to
proceed.
The access or deaccess code cannot be more
than 10 characters.
The first text line shows Calling. The second text
line shows the subscriber alias or ID, and the
Phone Call icon.
If the call is successful:
• The DTMF Tone sounds.
• You hear the dialing tone of the telephone
user.
• The first text line shows the subscriber alias or
ID, and the RSSI icon.
•
The second text line shows Phone Call, and
the Phone Call icon.
If the call is unsuccessful:
• A tone sounds.
•
The display shows Phone Call Failed and
then, Access Code:.
• Your radio returns to the screen you were on
prior to initiating the call if the access code has
been preconfigured in the Contacts list.
6 Press the PTT button to respond to the call.
The RSSI icon disappears.
7 Release the PTT button to listen.
8 Enter extra digits with the keypad if requested by
the call, and press
to proceed.
Capacity Max Operations
58
English