MR TAPCON 230 basic - Page 149

7 Functions and settings
© Maschinenfabrik Reinhausen 2012 2117246/02 EN TAPCON® 230 basic 149
The following red events may occur:
 Undervoltage
 Overvoltage
 Overcurrent
 GPI parameter setting error
The "GPI parameter setting error" event occurs if multiple inputs have
been parameterized with the same function. If this event occurs, check all
GPIs for correct function assignment and correct if necessary. Make sure
that parameter settings for a function are only made on one GPI.
To view the event overview, proceed as follows:
► > Info > 8x .
Event overview.