8 Fault elimination
160 TAPCON® 230 basic 2117246/02 EN © Maschinenfabrik Reinhausen 2012
34 Red
Blocking: Lower
blocked because tap
position limit reached or
exceeded
Message is displayed if lower is blocked be-
cause the corresponding tap position limit has
been reached or exceeded.
35 Red
Blocking: Raise
blocked because tap
position limit reached or
exceeded
Message is displayed if raise is blocked be-
cause the corresponding tap position limit has
been reached or exceeded.
36 Yellow
Tap position limit
reached or exceeded
Message is displayed if the set tap position limit
has been reached or exceeded.
37 Yellow Negative active power
Message is displayed if the active power is neg-
ative.
Table 53 Event messages
To Next Page
Loading...
