MR TAPCON 230 basic - Page 28

3 Product description
28 TAPCON® 230 basic 2117246/02 EN © Maschinenfabrik Reinhausen 2012
In auto and manual mode the measured value display can be set using the
or keys. The following measured values can be displayed:
 Control deviation (dV)
 Current (I)
 Apparent power (S)
 Active power (P)
 Reactive power (Q)
 Phase angle (Phase)
 Cosine (Cos)
Information relating to events (page 159) and settings is displayed in the sta-
tus line (display text 'Events').