1 Introduction
Maschinenfabrik Reinhausen 201410 2374092/04 ENTAPCON® 260
Safekeeping
This technical file and all supporting documents must be kept ready at hand
and accessible for future use at all times.
Notation conventions
This section contains an overview of the symbols and textual emphasis
used.
Hazard communication system
Warnings in this technical file are displayed as follows.
Warning relating to section
Warnings relating to sections refer to entire chapters or sections, sub-sec-
tions or several paragraphs within this technical file. Warnings relating to
sections use the following format:
WARNING
Type and source of danger
Consequences
► Action
► Action
Embedded warning information
Embedded warnings refer to a particular part within a section. These warn-
ings apply to smaller units of information than the warnings relating to sec-
tions. Embedded warnings use the following format:
DANGER! Instruction for avoiding a dangerous situation.
Signal words and pictograms
The following signal words are used:
Signal
word
Meaning
DANGER Indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could
result in injury.
NOTICE Indicates measures to be taken to prevent damage to
property.
Table 1: Signal words in warning notices
1.5
1.6
1.6.1
1.6.1.1
1.6.1.2
1.6.1.3
To Next Page
Loading...
