MR TAPCON 260 - Control System Protocol: GGIO1 Generic Process I;O; GGIO1 Common Logical Node Information; GGIO1 Status Information Details

7 Control system protocol
Maschinenfabrik Reinhausen 2014 1332374092/04 EN TAPCON® 260
Attribute name Attribute type Explanation M/O/E Remarks
Beh INS Behavior M -
Health INS Health O 1 = OK; 2 = signaling
YELLOW for
TAPGUARD; 3 = no
internal communica-
tion of parameter error
or signaling RED for
TAPGUARD
NamPlt LPL Name plate O
Controls
TapChg BSC Change tap position C direct with normal se-
curity
Measured values
- - - - -
Status information
EndPosR SPS End position raise
reached
M -
EndPosL SPS End position lower
reached
M -
Settings
- - - - -
Table 38: YLTC class
GGIO1 - Generic process I/O
Attribute
name
Attribute
type
Explanation M/O/E Remarks
GGIO1 - GPIO IO - -
Common logical node information
Mod ENC Mode O status-only
Beh INS Behavior M -
Health INS Health O 1: OK; 3: no in-
ternal communi-
cation
NamPlt LPL Name plate O -
Controls
- - - - -
Measured values
- - - - -
Status information
Ind1 SPS IO X1:31 O -
Ind2 SPS IO X1:33 O -
Ind3 SPS IO X1:16 O -
7.2.7