Muratec MFX-2550 Field Engineering Manual

1-6
Item Specifications
Contrast adjustment
>Auto yes, Only Copy mode
>Manual(#oflevels) yes (5levels)
>Modification for the original document
back-ground
Automation(w/ophotomode)
Document setting position and Scanning
Alignment (FBS)
Rear left corner
Acceptabledocumentsize(FBS)
>Auto detection no
>Max.W(mm)×D(mm) 216 x 356 mm (Legal: SEF)
DocumentSize
>Auto detection no*candetectthelengthafterscanning
>AcceptableDoc.Size
>>SinglepageDocumentThroughSize
>>>Max.DocumentSize 216 x 900 mm
>>>Min.DocumentSize 120 x 100 mm
>>>Doc. thickness 0.05 - 0.15 mm
>>>Doc. Weight (g/m
2
) 35g/m
2
- 128g/m
2
>>MultipagesDocumentThroughSize
>>>Max.DocumentSize 216 x 356 mm
>>>Min.DocumentSize 216 x 139.5 mm
>>>Doc. thickness 0.07 - 0.12 mm
>>>Doc. Weight (g/m
2
) 52.0 - 105.0 g/m
2
Scanning Alignment (DADF/ADF) Center
Document setting (DADF/ADF) Face up
Auto document feeder (sheets)
(DADF/ADF)
80 sheets (Letter(SEF), Legal(SEF), HalfLetter(LEF))
Scanning resolution
>Copy (B/W)
(Auto, Text, Photo, Photo/Text, Background Off)
All modes: 600 dots/inch x 600 lines/inch
>Fax
>>Memory transmission
>>>Super Fine
600dpi×600dpior
16dots/mm×15.4lines/mm
(406dpi×392lpi)
>>>Fine 8dots/mm×7.7lines/mm
(203dpi×196lpi)
>>>Normal 8dots/mm×3.85lines/mm
(203dpi×98lpi)
>>>Grayscale 8dots/mm×7.7lines/mm
(203dpi×196lpi)
>>>Background off 8dots/mm×7.7lines/mm
(203dpi×196lpi)
>>Real-time transmission
>>>Super Fine 600dpi×600dpior
16dots/mm×15.4lines/mm
(406dpi×392lpi)
>>>Fine 8dots/mm×7.7lines/mm
(203dpi×196lpi)
>>>Normal 8dots/mm×3.85lines/mm
(203dpi×98lpi)
>>>Grayscale 16dots/mm×15.4lines/mm
(406dpi×392lpi)
>>>Background off 8dots/mm×7.7lines/mm
(203dpi×196lpi)
100dpi x 100dpi

Muratec MFX-2550 Specifications

General

Brand	Muratec
Model	MFX-2550
Category	All in One Printer
Language	English