3.3 Memory Switch Adjustment
3.3.1 Setting the Memory Switches
Theseswitchesareusedtoprograminternalmachineparameters.Theprimarybackupbatterymaintains
thesesettingsifpowerarelost.
1.Fromstandby,press<Setting>,<*>,<0>,<1>.
2.Press[MemSwitchEdit].
3.Callupthedesiredswitchbypressing or , or by pressing the numeric keypad.
4.Selectthedesiredswitchbypressingthebox.
5.Tonavigatethroughthememoryswitchsettings:
• Thebitsarerangedfrom7(left)to0(right).
• Press or ofthecursorkeytomovethecursor.
• Press<0>or<1>onthenumerickeypad,or[ ]or[ ]tochangethebitvalue.
• Press[Enter]tosavethesettingofthedisplayedmemoryswitchandreturntothememoryswitch
edit screen.
• Press[Back]nottosavethesettingofthedisplayedmemoryswitch.
6.Ifyouwanttosetothermemoryswitches,repeatstep3-5.Otherwise,proceedtostep7.
7. Press <Reset> to return the machine to ready screen.
YoucanconrmtheinitialsettingofeachMemorySwitchbytheMemorySwitchesList.
ThememoryswitchListwillbeprintedbypressing[MemSwitchPrint].
To Next Page
Loading...
Need help?
General
