3.11 Monitor speaker
If you need to monitor the signal of fax communication, turn this mode to on. You can hear the signal
soundwithmachine’sspeakerduringfaxtransaction.
1. Press<Setting>,<*>,<0>,<8>.
2. Selectthemonitortypefrom[ONuntilDIS]or[ON].
3. Selectthespeakervolume.
 Toturnthismodeoff,performstep1and2byselecting[OFF].
3.12 Test Modes
This mode offers the ability to print a test pattern and monitor certain unit output functions. Included
arefollowings.
• Lifemonitor
• Testpatternprint
• Documentfeedingtest
• Setbackgroundlevel
• MakecolorGamma
• SelectcolorGamma
3.12.1 Life Monitor
This function displays the machine status.
1.Press<Setting>,<*>,<0>,<9>, thenselect[LifeMonitor].
2.Press[Detail]toseetheoptions.
•ROM Ver.0 =displaysmaincontrolboardsoftwareversion
•ROM Ver.1 =displaysnetworksoftware(OfceBridge)version
•ROM Ver.2 =displaysPDL(printerdescriptionlanguage)version
Display Item Detail
1
Scan Count
CumulativetotalpagesPage Count
Tx (Transmission) Count
2
Drum Recycled Number of times drum is replaced
Drum Life
Currentdrumworkingtime(x10seconds)
After Replaced Total printed pages on current drum
After Caution
Totalprintedpagessince"Replacedrum"warningis
displayed
To Next Page
Loading...
Need help?
General
