Muratec MFX-2550 Field Engineering Manual

3-27
Machine Parameter 286 ~ 287— Factory use only
Machine Parameter 288
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Current adjustment
Transparency sheets (OHP)
The plus setting increases
the current and the minus
setting decreases it.
Each setting changes by
0.11 mA.
When transfer problems occur, adjust
this parameter.
Switch 76543210Settings
31 steps 00011111 +3.41 mA
:
8 steps 00001000 +0.88 mA
:
00000000 0 mA  Initial setting
-1 steps 10000001 -0.11 mA
-2 steps 10000010 -0.22 mA
:
-8 steps 10001000 -0.88 mA
:
-31 steps 10011111 -3.41 mA
WhenSwitch7is“1”,itmeans“-”.Forexample,
“10000001” means “-0.11 mA”.
NOTE
•Adjustingthemtoomanystepsaffecttheprint
quality.Justtrytodecreaseoneortwosteps
at first.
•DONOTadjustthestepslargerthan31or
smaller than -31.
6 0
5 0
4 0
3 0
2 0
1 0
0 0
Machine Parameter 289
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Current adjustment
LetterandLegalsize
Plain paper back side
The plus setting increases
the current and the minus
setting decreases it.
Each setting changes by
0.11 mA.
When transfer problems occur, adjust this param-ur, adjust this param-r, adjust this param-this param-
eter.
Switch 76543210Settings
31 steps 00011111 +3.41 mA
:
8 steps 00001000 +0.88 mA
:
00000000 0 mA  Initial setting
-1 steps 10000001 -0.11 mA
-2 steps 10000010 -0.22 mA
:
-8 steps 10001000 -0.88 mA
:
-31 steps 10011111 -3.41 mA
WhenSwitch7is“1”,itmeans“-”.Forexample,
“10000001” means “-0.11 mA”.
NOTE
•Adjustingthemtoomanystepsaffecttheprint
quality.Justtrytodecreaseoneortwosteps
at first.
•DONOTadjustthestepslargerthan31or
smaller than -31.
6 0
5 0
4 0
3 0
2 0
1 0
0 0

Muratec MFX-2550 Specifications

General

Brand	Muratec
Model	MFX-2550
Category	All in One Printer
Language	English