Handling the printer RJ-900X series OPERATION MANUAL
4-18
TopFeed <0 mm> to 100 mm At the beginning of printing, media feed is performed.
Set for printing on roll media.
• When Top Feed is set to 0 mm, media
margin is 3 mm.
ManageRoll <Invalid> Management of remaining quantity of roll media is not
performed.
Roll1
Remaining quantity of roll media is set.
It can be set within the range of 0 m to 99 m.
Four types each can be set as "Roll1" to "Roll4".
Roll2
Roll3
Roll4
Cut RollTop <0mm> to 500mm At media initialization, media is cut by the set length.
Setup item Setting value Description
To Next Page
Loading...
Need help?
General