VJ-1324X OPERATION MANUAL Maintenance
6.1 Replacing consumable components 205
c. Press the [+] key or [–] key to select “Set20: CR Maintenance”.
d. Press the [Enter] key on the operation panel.
• “CR Mainte.: Start” is displayed on the operation panel.
• The display enters the CR Maintenance menu.
5.1.19 CR Maintenance menu
3. Press the [Enter] key on the operation panel.
• Maintenance starts.
• The print head moves to the left of the printer (cutter replacement position).
• “CR Maintenance: End” is displayed on the operation panel.
To Next Page
Loading...
