VJ-1324X OPERATION MANUAL Maintenance
6.1 Replacing consumable components 207
6. Remove the cutter.
• Do not touch the blade edge.
It may cause an injury.
• Do not touch the cutter blade edge with a hard substance or drop the cutter.
The cutter blade may be damaged or chipped.
• Used cutter should be put in a plastic bag, etc, and dispose of it in compliance with local ordinance
and instructions of local authorities.
7. Install a new cutter as illustrated.
• Make sure that the spring in the cutter holder does not fly out while installing.
No. Name
1 Razor blade
To Next Page
Loading...
