Reassembly – front wheel bearings
Before proceeding with the reassembly, accurately
clean the bearing seats in the wheel hub.
Lubricate the outer ring of both bearings with special
grease.
Mount the bearing on the specific tool and insert it in
the rim housing.
Recommended product: Agip Grease 30
Special tool No. 8000B4421
Mount the bearing and a spacer on the specific tool.
Special tool No. 8000B4421
Suspension and wheels
F
- 8-
Insert it on the opposite part, keeping the rim in a verti-
cal position.
To Next Page
Loading...
