Suspension and wheels
F
- 25 -
Tighten the screws (1) to the prescribed torque pres-
sure. After having carried out the assembly of the right
clip-on handlebar, check that the accelerator handgrip
rotates freely and smoothly.
Grease only the first threads.
Torque pressure: 8 ÷ 10 N·m
8÷10 N•m
Replace the brake line holding clamps.
Mount the front wheel and brake callipers according to
procedures contained in the previous pages.
FRONT SUSPENSION ADJUSTMENT
After properly fitting the fork assembly, adjust the front
suspension so as to ensure optimum vehicle geometry.
To Next Page
Loading...
