EFA-200/-300 7 Measurement data memory
7-19
Deleting the data set with the highest number
✓ The MEM CLR menu is activated.
1. Press F1.
• The data set with the highest data set number will be deleted.
• The data set with the next lower data set number will be displayed.
2. Press the ESC to return to the measurement screen.
Deleting the entire data memory
✓ The MEM CLR is activated.
Note: Pressing F1 or F4 results in immediate, irreversible deletion of the
data set(s). You will not be prompted to confirm that you want to
delete the data.
1. Press F4.
The entire data memory will be cleared.
The display will indicate: “MEM: 0”
2. Press the ESC to return to the measurement screen.
To Next Page
Loading...
