11 Remote control EFA-200/-300
11-12
11.4.2 Reading out current measurement values
For Field Strength and Exposure STD modes only
Write / action
commands
Read commands Range of values of p Meaning or units
of p
Read measurement value units
– C177 0 = T
1 = G
2 = V/m
3 = %
Query result validity
– C179 0 = valid
1 = in processing
2 = overdriven
Select / read frequency measurement value
C182 <p> C183 0 = OFF
1 = ON
Complements
field
measurement
value
Transfer of individual measured values
Read measured value
C254 0 – <SCI4D><ws><valid
>
[<ws> 5 to 32000]
Units as selected
Frequency only
in Field Strength:
BROAD BAND
mode.
Read header and measured value
C254 1 – <header><ws>
<SCI4D><ws><valid
>
[<ws> 5 to 32000]
Units as selected
Frequency only
in Field Strength:
BROAD BAND
mode.
Table 11-6 Remote control commands, read current measured values
To Next Page
Loading...
