NARDA EFA-200 - General Functions; Test; Service

11 Remote control EFA-200/-300
11-28
11.4.5 General functions
11.4.6 Test / Service
Save device settings
C172 <p> – 1 to 4 Consecutive
number of setup
Recall device settings
C174 <p> – 0 = Factory
1 to 4
Consecutive
number of setup
Table 11-22 Remote control commands, device data memory
Write / action
commands
Read commands Range of values of p
Meaning
Explanation
Select / read baud rate
C100 <p> C101 0 = 9600
1 = 19200
Units: baud
Activate / read display backlight
C108 <p> C109 0 = OFF
1 = ON
Define / read display contrast
C114 <p> C115 0…31
Table 11-23 Remote control commands, general functions
Write / action
commands
Read commands Range of values of p
Meaning
Explanation
Read identification number
– C103 0 <id number> 16 characters,
hexadecimal
Table 11-24 Remote control commands, test / service