3-1
3 Preparation for use
3.1 Unpacking
3.1.1 Packaging
Do not discard the packing materials. These items have been specially
designed to be reused if they are not damaged. Always use the original
packaging when transporting the instrument if possible.
3.1.2 Checking the package contents
Ordering information: see page 12-23
3.1.3 Checking for transport damage
After unpacking, check the instrument and all accessories for transport
damage. Such damage is likely if the packaging itself has been severely
damaged. Do not attempt to use an instrument which is visibly damaged.
3.1.4 Recovery after transport and storage
Condensation may form on an instrument which has been stored or
transported at a low temperature when it is brought into a warm
environment. To prevent any damage, wait until all signs of condensation on
the instrument surfaces have disappeared before switching the instrument
on. The instrument is only ready for use when it has reached the guaranteed
operating temperature range of 0 to +50
°C.
To Next Page
Loading...
