NARDA EFA-200 - Measurement Data Memory

11 Remote control EFA-200/-300
11-16
11.4.3 Measurement data memory
Timer-controlled measurements
for Field Strength, Exposure STD modes only
Write / action
commands
Read commands Range of values of p Meaning or units
of p
Save data set
C220 – – SAVE
Clear last data set
C222 – – CLEAR LAST
Clear all data sets
C224 – – CLEAR ALL
Read free memory space in %
– C241 0 to 100 % of data
memory capacity
Table 11-10 Remote control commands, measurement data memory
Write / action
commands
Read commands Range of values
of p
Meaning or units of p
Define / read start time of timer-controlled data storage
C72 0 <p> C73 0 <hh><ws><mm>
<ws><ss>
Read only:
<hh:mm:ss>
Define / read stop time of timer-controlled data storage
C72 1 <p> C73 1 <hh><ws><mm>
<ws><ss>
Read only:
<hh:mm:ss>
Define / read step width of timer-controlled data storage
C72 2 <p> C73 2 <hh><ws><mm>
<ws><ss>
Read only:
<hh:mm:ss>
Table 11-11 Remote control commands, timer-controlled measurements