7 Measurement data memory EFA-200/-300
7-14
7.2 Displaying a data set
The contents of the MEM SHOW menu depend on the intended
measurements for the different measurement modes.
Figure 7-6 MEM SHOW menu in Field Strength mode
2
3
4
5
6
7
8, 9
1
No. Function Operating mode
Field
Strength
Exposure
STD
Spectrum
FFT
Harmonic
Analysis
1 Remaining capacity of data
memory [%]
x
x
x
2 Data set number x x
3 Operating mode used for
measurement
FIELDST EXP.STD SPECTRUM
FFT
HARMONICS
4 Type of data set N: Normal
A: Auto
M: Matrix
N: Normal
A: Auto
M: Matrix
V: Vector L: List
5 Date of measurement x x
6 Time of measurement x x
Table 7-5 Overview of MEM SHOW menu elements according to operating mode
To Next Page
Loading...
