NARDA EFA-200 - Page 157

EFA-200/-300 11 Remote control
11-23
“Current” function
for Field Strength, Exposure STD modes only
“Standards” function
for Field Strength, Exposure STD modes only
Write / action
commands
Read commands Range of values of p
Meaning
Explanation
Define / read current value I REF
C260 0 <p> C261 0 0 to 99999.9 Units A,
e.g. nominal
current
Define / read current value I MAN
C260 1 <p> C261 1 0 to 99999.9 Units A,
e.g. wire current
Activate / read recording of current values
C260 2 <p> C261 2 0 = OFF
1 = ON
Table 11-15 Remote control commands, “Current” function
Write / action
commands
Read commands Range of values of
p
Meaning
Explanation
Select / read active limit value curve
C116 p C117 1 to 6 Consecutive
number of
available limit
value curves
Table 11-16 Remote control commands, “Standards” function