EFA-200/-300 11 Remote control
11-25
Filter frequencies
for Field Strength mode only
Write / action
commands
Read commands Range of values of
p
Meaning
Explanation
Bandpass filter: Define / read filter frequency
C132 0 <p> C133 0 15.0 to 2000.0 Units: Hz
List index: 0
C132 1 <p> C133 1 15.0 to 2000.0 Units: Hz
List index: 1
C132 2 <p> C133 2 15.0 to 2000.0 Units: Hz
List index: 2
C132 3 <p> C133 3 15.0 to 2000.0 Units: Hz
List index: 3
C132 4 <p> C133 4 15.0 to 2000.0 Units: Hz
List index: 4
C132 5 <p> C133 5 15.0 to 2000.0 Units: Hz
List index: 5
Bandstop filter: Define / read filter frequency
C134 0 <p> C135 0 15.0 to 2000.0 Units: Hz
List index: 0
C134 1 <p> C135 1 15.0 to 2000.0 Units: Hz
List index: 1
C134 2 <p> C135 2 15.0 to 2000.0 Units: Hz
List index: 2
C134 3 <p> C135 3 15.0 to 2000.0 Units: Hz
List index: 3
C134 4 <p> C135 4 15.0 to 2000.0 Units: Hz
List index: 4
C134 5 <p> C135 5 15.0 to 2000.0 Units: Hz
List index: 5
Table 11-19 Remote control commands, filter frequencies
To Next Page
Loading...
