D-1
Annex D: Data export format
Exporting data: see page 7-16
Exported data are available as *.txt or *.csv files.
Individual data items are separated using the separator chosen for the
export operation.
Each export document is preceded by an information block summarizing the
device data.
The exported measurement data differ as a function of the mode and the
data set type. Their differences are described below.
Information block
Parameter Code
Device type Device:
Serial number SN:
Calibration date CAL_DATE:
Hardware version HW-Version:
Software version SW-Version:
Software creation date SW-Date:
Software creation time SW-Time:
To Next Page
Loading...
