EFA-200/-300 7 Measurement data memory
7-17
2. Activate the “Enable” box for the data set type to be exported.
3. Enter in the “From” and “To” boxes the numbers of the data sets in the
selected data set type to be exported.
4. Select the desired export format (*.txt or *.csv) from the EXPORT menu.
Note: You can select various separator characters for the “*.csv” format.
The separator character that you select here must correspond to
the one used by the program that is to be employed for further
processing of the results.
5. Select a suitable separator character.
6. Press the WRITE DATA TO FILE key.
The directory window opens for defining the name and directory for the
exported data.
7. Enter and confirm the name and directory.
The transfer begins.
The “Loading” box indicates the progress of the transfer.
Press the BREAK key to halt the transfer.
Opening exported files with the program used for further processing
Note: Open an exported CSV file in the program used for further
processing by using the “Open File” menu command. Do not
double click on the CSV file to open it as this may result in an
incorrect display of the file.
To Next Page
Loading...
