Native Instruments Maschine User Manual

The Note Repeat mode on the controller.
In Note Repeat mode you can customize the way your Sounds/notes will be repeated by adjust-
ing following settings:
Element Description
Button 5–8 Select between four different presets — also while playing. The rate
currently assigned to each button is indicated below on the display.
The selected rate is highlighted. You can change the rate and rhythm
assigned to each button by selecting it and using Knob 2 and 3,
respectively (see below).
RATE (Knob 5) Adjusts the rate assigned to the selected Button 5–8. Available
values are 1 BAR and a series of note values going from 1/2 (half
note) until 1/128 (a hundred twenty-eighth note).
TYPE (Knob 6) Selects from three variations of the original note length defined by
the RATE parameter: NORMAL plays the original note length (default
setting), TRIPLET plays triplets of the original note length (faster,
three notes in the duration of two original notes), and DOTTED plays
dotted versions of the original note length (slower, two notes in the
duration of three original notes). Under Button 5–8, triplet values are
indicated by a “T” and dotted values by a “D” next to the note value.
Playing on Your Controller
Playing Tools
MASCHINE - Manual - 228

Native Instruments Maschine Specifications

General

Weight	4.85 lbs (2.2 kg)
Pads	16 velocity-sensitive pads with aftertouch
Connectivity	USB, MIDI In/Out
Software	Maschine Software
Compatibility	Mac and PC
Power Supply	USB powered
Audio Interface	No built-in audio interface
Sequencer	Yes, pattern-based sequencer
Sampling	Yes, integrated sampler
Effects	Yes, includes a variety of effects
Encoders	8 knobs with LED ring indicators
DAW Integration	Yes, works as a plugin within most major DAWs