Native Instruments Maschine User Manual

Parameter Description
Engage Activates the filter.
Frequency Sets the cutoff frequency according to the min/max range
parameters.
FILTER
Type Selects from Low Pass, Band Pass and High Pass modes.
Resonance Sets the resonance of the filter. Values over 100% will lead
to self-oscillation—be careful! Turn down the Output Gain
(and turn up the Saturation to compensate) in order to avoid
extremely loud ringing. Note that the resonance will sound
more pronounced at lower saturation settings and vice versa.
Setup Page
Parameter Description
RANGE Section
Min. Freq Sets the lower limit for cutoff frequency.
Max. Freq Sets the upper limit for cutoff frequency.
SATURATION Section
Saturation Sets the input gain of the filter.
Out Level Sets the output gain of the filter.
12.7.2 Flanger
A comb filter effect with more than a few tricks up its sleeve. Get performance-ready flanger or
phaser effects, or expose its wild side – setting higher decay and frequency values unleashes
ping-pong delay-like flutter effects.
Effect Reference
Perform FX
MASCHINE - Manual - 671

Native Instruments Maschine Specifications

General

Weight	4.85 lbs (2.2 kg)
Pads	16 velocity-sensitive pads with aftertouch
Connectivity	USB, MIDI In/Out
Software	Maschine Software
Compatibility	Mac and PC
Power Supply	USB powered
Audio Interface	No built-in audio interface
Sequencer	Yes, pattern-based sequencer
Sampling	Yes, integrated sampler
Effects	Yes, includes a variety of effects
Encoders	8 knobs with LED ring indicators
DAW Integration	Yes, works as a plugin within most major DAWs