Native Instruments Maschine User Manual

Multiple selection is not possible from the controller. Hence, setting the focus to the
previous/next Zone automatically deselects any other Zone, the focused Zone now being
the only selected Zone.
The Sample can be played back on the Cue channel at any time by pressing the corresponding
pad on your controller. When the Sample is played back, the Playhead indicator (vertical line)
shows you the current play position within the waveform on the right display.
For more information on the Cue channel, please refer to section ↑9.2.6, Using the Cue
Bus.
Removing a Zone
►
On the ZONE page of Sampling mode, press Button 5 (REMOVE) to remove the focused
Zone from the Sound.
14.5.4 Selecting and Editing Zones in the Map View
The Map view is visible when the Sample View button (showing a little waveform icon at the
right of the Zone tab) is disabled.
Disable the Sample View button to see the Map view.
The Map view contains following elements:
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE - Manual - 808

Native Instruments Maschine Specifications

General

Weight	4.85 lbs (2.2 kg)
Pads	16 velocity-sensitive pads with aftertouch
Connectivity	USB, MIDI In/Out
Software	Maschine Software
Compatibility	Mac and PC
Power Supply	USB powered
Audio Interface	No built-in audio interface
Sequencer	Yes, pattern-based sequencer
Sampling	Yes, integrated sampler
Effects	Yes, includes a variety of effects
Encoders	8 knobs with LED ring indicators
DAW Integration	Yes, works as a plugin within most major DAWs