Native Instruments Maschine - Selecting Scenes and Scene Banks

▪ Dim lit pads indicate Scene slots containing a Pattern.
▪ Unlit pads represent empty Scene slots.
Scene Arrange Mode
►
In Scene mode, press Button 2 (ARRANGE) to switch to Scene Arrange mode.
Scene Arrange mode is similar to Scene mode except that the right display of your controller
now shows a visual representation of your arrangement:
The Scene Arrange mode on the controller displays.
▪ All Scenes of your arrangement are presented in an horizontal sequence.
▪ The selected Scene is highlighted.
▪ Above the Scenes, a timeline indicates bars and beats.
▪ The playhead indicator and the Loop Range are also shown.
▪ Turn Knob 5 and 6 to zoom and scroll the arrangement, respectively. You can also enable
Button 3 (FOLLOW) and let the right display follow the playhead as it travels through your
arrangement — see section ↑13.1.3, Following the Playback Position in Your Project for
more information.
Apart from this, Scene Arrange mode and Scene mode are identical. In particular, Scene and
Scene Arrange modes provide useful Scene management commands. These are described in
the following sections.
13.2.2 Selecting Scenes and Scene Banks
You can select the desired Scene via the Scene Manager or directly in the Arranger.
Selecting a Scene in the Arranger
To select a Scene in the Arranger, do the following:
Creating a Song Using Scenes
Managing Scenes
MASCHINE - Manual - 708