You can also drag a Pattern from the pad grid onto the Pad List, and inversely!
7.7.10 Adjusting Pattern Length in Fine Increments
Patten Length can be adjusted in fine increments to create irregular pattern lengths by tempo-
rarily pressing the [Shift] button on your computer keyboard or SHIFT on the MASCHINE con-
troller while adjusting the Pattern Length. The size of fine increments are defined using the
Step Grid.
1. Press GRID and then Button 4 to access STEP.
2. Use Buttons 5 to 8 to select the required Step Grid size.
3. Press PATTERN to access the pattern page, and pin it if required by pressing Button 1.
4. Press the corresponding pad to select the pattern you want to edit.
5. Press SHIFT and turn Knob 4 LENGTH to adjust Pattern Length in fine increments.
→
Pressing SHIFT temporarily allows the Pattern Length to be adjusted in fine increments
according the value of the Step Grid.
7.8 Importing/Exporting Audio and MIDI to/from Patterns
In the Pattern Editor you can quickly export MIDI and audio from Patterns and import MIDI to
Patterns via drag and drop.
7.8.1 Exporting Audio from Patterns
The Audio drag-and-drop function allows you to export audio from the selected Pattern onto
your desktop or into your host software by simply dragging it onto the target location or appli-
cation. This function is only available in the software.
The audio will be exported as a WAV audio file and according to the current settings of the
Export Audio panel (see section ↑4.4.3, Exporting Audio for more information on these set-
tings) with following exceptions:
Working with Patterns
Managing Patterns
MASCHINE - Manual - 387
To Next Page
Loading...
Need help?
General
