8.1.5.2 Configuring External Inputs for Sounds in MASCHINE
All input channels, including Individual mono L and R channels can be found at the bottom of
the input selection drop-down menus. The metering of mono inputs is shown as dual-mono.
To configure an external input for a Sound:
1. Select the Group and Sound for external sound source input.
2. Press the CONTROL button.
3. Press Button 3 SOUND.
4. Press Button 5 CHANNEL.
5. Press Button 7 repeatedly to select INPUT.
6. Turn Knob 1 to select the input source.
→ The list of stereo and mono inputs are available for selection.
8.2 Using MIDI Control and Host Automation
MASCHINE provides you with flexible MIDI remote control and host automation facilities that
can be used in many situations.
Incoming MIDI and Host Automation
MASCHINE’s Master, Groups and Sounds can be controlled via MIDI and the host (when MA-
SCHINE is running as a plug-in), both globally and individually:
â–ª By default, all MIDI data incoming on the enabled MIDI input port(s) will be received by
the focused Sound of the focused Group. See ↑2.6.3, Preferences – MIDI Page to find in-
formation on how to enable/disable MIDI input ports in MASCHINE.
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE - Manual - 427
To Next Page
Loading...
Need help?
General
