Switching Instances using the Controller
To switch from one MASCHINE instance to another:
▪ Press SHIFT + STEP.
▪ Turn Knob 5 (or press Button 5/6) to select the desired instance.
▪ Press Button 8 to load that instance.
2.5.3 Controlling Various Instances with Different Controllers
You can use two or more MASCHINE controllers of different types (MASCHINE STUDIO, MA-
SCHINE MK2, MASCHINE MIKRO MK2, MASCHINE, and MASCHINE MIKRO) simultaneously
with different instances of the MASCHINE software (possibly with one instance in stand-alone
mode). In doing so, the following applies:
▪ Only one MASCHINE controller of any type can be connected to an instance at a time. You
can choose which instance you want to control from each controller as described in ↑2.5.2,
Switching Instances.
▪ When you start a new instance of the MASCHINE software, it connects to one of the MA-
SCHINE controllers according to following precedence rules:
◦ Rule 1: The MASCHINE STUDIO controller focus has priority over the MK2 controllers
(MASCHINE MK2 and MASCHINE MIKRO MK2), which themselves take priority over
legacy controllers (MASCHINE and MASCHINE MIKRO).
◦ Rule 2: The MASCHINE controllers (legacy and MK2) have prority focus over MA-
SCHINE MIKRO controllers (legacy and MK2).
◦ Rule 1 has priority over rule 2.
2.6 Preferences
The Preferences panel lets you specify various settings for MASCHINE.
►
To open the Preferences panel, click Preferences… in the Maschine menu (Mac OS X) or
File menu (Windows) of the Application Menu Bar, or in the File submenu of the MA-
SCHINE menu:
Basic Concepts
Stand-Alone and Plug-in Mode
MASCHINE - Manual - 58
To Next Page
Loading...
