â–ª Root Note (C3 by default): Defines both the root note of the scale and the particular key
triggered by pad 1. As a direct consequence, pad 1 always triggers the root note of the se-
lected scale.
The Root Note parameter replaces the Base Key parameter found in the Keyboard mode
of previous MASCHINE versions and still available in Group mode. Although the Root
Note is edited in the same way as the Base Key on your controller, keep in mind that
both are independent of each other. Compared to the Base Key, the Root Note addition-
ally defines the starting note of the selected scale. Furthermore, like all Scale and Chord
parameters, the Root Note is common to all Sound slots in the Group, whereas the Base
Key is set for each Sound slot independently.
â–ª Scale Type (Chromatic by default): Selects the scale pattern whose notes will be mapped
onto the pads of your controller: The Root Note is on pad 1, the 2nd note of the selected
Scale Type is on pad 2, etc. Once all notes are mapped, the next pad triggers the root note
in the next octave. The Root Note and its octaves are indicated by fully lit pads, while other
pads are dimmed.
Following scale types are available:
Scale Type
Degrees (1 = Root Note)
Chromatic (default) 1 #1 2 #2 3 4 #4 5 #5 6 #6 7
Major 1 2 3 4 5 6 7
Minor 1 2 â™3 4 5 â™6 â™7
Harmonic Minor 1 2 â™3 4 5 â™6 7
Major Pentatonic 1 2 3 5 6
Minor Pentatonic 1 â™3 4 5 â™7
Blues 1 â™3 4 #4 5 â™7
Japanese 1 2 â™3 5 â™6
Freygish 1 â™2 3 4 5 â™6 â™7
Gypsy 1 2 â™3 #4 5 â™6 7
Playing on Your Controller
Performance Features
MASCHINE - Manual - 246
To Next Page
Loading...
Need help?
General
