If MASCHINE is running as a plug-in in a host and you have configured your Scenes to
be triggered via MIDI notes, the Scene trigger has priority over any Sound trigger set to
the same MIDI channel. To configure MIDI control for Scenes, please refer to section
↑13.4, Triggering Scenes via MIDI (MASCHINE Plug-in Only).
Configuring MIDI Note Input for Sounds and Groups in Mix View
You can also easily configure the MIDI note input of your Sounds and Groups in MASCHINE’s
Mixer:
1. Click the Mix View button on the left of the Arranger to switch from Arrange view to Mix
view:
2. Open the extended view of the Mixer by clicking the down-pointing arrow on the left of the
Mixer:
3. Check that the IO button is active on the left of the Mixer — if not, click it to enable it
and display the input/output settings of each channel strip.
Audio Routing, Remote Control, and Macro Controls
Using MIDI Control and Host Automation
MASCHINE - Manual - 432
To Next Page
Loading...
