Parameter Description
HIGH-MID Section
Freq Frequency selector for the second mid-frequency band. Ranges
from 40 Hz to 16 kHz.
Gain This determines how much the selected frequency is increased/
attenuated by.
HIGH Section
Freq Frequency selector for the high frequency band. Ranges from 50 Hz
to 20 kHz.
Gain This determines how much the selected frequency is increased/
attenuated by.
The EQ on the controller: FREQ / GAIN page.
Width / Output Page
The EQ in the Control area: Width / Output page.
Parameter Description
LOW-MID Section
Width Bandwidth control for the first mid-frequency band.
Effect Reference
Filtering Effects
MASCHINE - Manual - 624
To Next Page
Loading...
