The Distortion in the Control area.
Parameter Description
MAIN Section
Drive Determines the basic amount of distortion.
Color At lower settings, the general sound is a bit more muffled; the
higher the settings, the brighter it sounds.
Feedback Adjust the amount of output signal fed back into the input.
Tone General tonal characteristic of the feedback signal.
Tone Mod Modulation introduced in the feedback signal.
OUTPUT Section
Gate The Gate button is used to cancel out feedback loops
introduced by high Feedback settings.
Release This parameter determines how fast the distorted sound dies
down when the Gate is enabled.
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
The Distortion on the controller.
Effect Reference
Distortion Effects
MASCHINE - Manual - 661
To Next Page
Loading...
