Native Instruments Maschine User Manual

Main Page
Parameter Description
MODE
Mode Select an effect.
TOUCHSTRIP
Engage Enables and disables the effect.
Position Controls the tremolo and vibrato rate and depth, within the
ranges defined by the Min and Max parameters on the second
page.
TREMOLO
Trem/Vibr Controls the balance between tremolo (modulation of
amplitude) and vibrato (modulation of frequency/pitch).
Vibr Mode Sets the vibrato mode. Two are available: Varispeed, which
modulates the playback speed of the audio, much like moving
the pitch control on a turntable or tape player, and Freq Shift,
which uses a modulated frequency shifter. Freq Shift
produces a somewhat detuned sound due to the nature of the
frequency shifting—low frequencies are more audibly shifted
than high frequencies. Varispeed scales pitches evenly across
the audible range, but it introduces small fluctuations in
timing.
Attk/Rel Controls the speed at which the effect comes on after turning
the effect on and tails off after releasing the effect.
Stereo Controls the stereo width of the modulation.
Effect Reference
Perform FX
MASCHINE - Manual - 685

Native Instruments Maschine Specifications

General

Weight	4.85 lbs (2.2 kg)
Pads	16 velocity-sensitive pads with aftertouch
Connectivity	USB, MIDI In/Out
Software	Maschine Software
Compatibility	Mac and PC
Power Supply	USB powered
Audio Interface	No built-in audio interface
Sequencer	Yes, pattern-based sequencer
Sampling	Yes, integrated sampler
Effects	Yes, includes a variety of effects
Encoders	8 knobs with LED ring indicators
DAW Integration	Yes, works as a plugin within most major DAWs