Setting Description
Velocity Scaling Velocity Scaling determines how your playing is translated into
velocity values: starting from Soft 3 (a soft touch is enough to
get a big velocity value) through Linear to Hard 3 (you really
have to hit the pad hard to get a big velocity value).
Display
Brightness The Brightness slider allows you to adjust the brightness of both
left and right displays of the MASCHINE controller.
Contrast Left and Right With these sliders you can adjust the contrast of the left and
right displays separately.
Adjusting the Settings from the Hardware
You also have access to the Sensitivity, Brightness, and Contrast Left, and Contrast Right set-
tings from your controller. To do this, you first have to enter MIDI mode:
1. Press SHIFT + CONTROL (MIDI) to switch your controller to MIDI mode.
2. Press SHIFT + Button 4 (SETTINGS) to show the Settings Display mode.
3. Turn Knob 1 (BRIGHT.) to adjust the Brightness parameter described above.
4. Turn Knob 2 (PADSENS) to adjust the Sensitivity parameter described above.
5. Turn Knob 4 (CNTR.L) and 5 (CNTR.R) to adjust the Contrast Left and Contrast Right pa-
rameters described above, respectively.
6. When you’re done, press SHIFT + CONTROL (MIDI) again to quit the MIDI mode and get
back to MASCHINE mode.
For more information on the MIDI mode, please refer to the Controller Editor Manual.
Basic Concepts
Preferences
MASCHINE - Manual - 88
To Next Page
Loading...
Need help?
General
