Net research NetProbe 2000 - Setup; SFP Identity

161
12.2 Setup
Press the SETUP button configure the Test Port, Network Setting and display SFP information.
12.2.1 SFP Identity
To identify the SFP device plugged into the tester SFP socket, press on the SFP tab.
The module information includes:
• SFP EXISTence
• SFP LOS (SFP Loss of Signal)
• Vendor name
• Part Number
• Serial Number
• Wavelength
• Tx optical power (dBm)
• Rx optical power (dBm)
• SFP temperature