347
Frame Loss
Burst ( back to back)
Single tester mode
Measurements:
Throughput: Frame size, Throughput %, Status
Latency: Frame size, Rate %, Latency us, Jitter us, Status
Frame Loss: Frame size, Frame Loss%, Status
Burst: Frame size, Frame count, Status
Graphs for all
21.11 Gigabit ADV Analyzer Option:
Requires Gigabit Basic Analyzer option.
Loopback:
Automatic or manual, layer 1,2,3
BERT:
Adds VLAN Q-Q ( up to 2 tags), MPLS ( up to 2 tags)
Y.1564 Compliance:
Service Configuration and Service Preformance tests per ITU-T
Y.1564 standard.
Up to 8 simultanous tests
Traffic layers: 2,3,4
Independently configurable for each stream: bandwidth profile
parameters (CIR, EIR, Traffic policing, Color Mode), Service
Acceptance Criteria (FDT, FDV, Frame Loss, Availability)
Traffic coloring: VLAN Priority, VLAN DIE, IP DSCP, IP ECN
Detailed measurements(ULR, FTD, FDV, FLR, AVAIL) for each stream
with pass/fail status
Traffic Generation:
Layer 1, Layer 2, Layer 3, Layer 4 traffic
Configurable source and destination MAC address
Configurable 802.1q VLAN tag and 802.1p priority
Stacked VLAN: none, 1, 2 (Q-in-Q)
Configurable MPLS tags (up to 2 tags)
Configurable source and destination IP address (IPv4)
Configurable IP header fields (ToS, TTL, Protocol, and Frame Offset)
for QoS verification testing
Up to 8 traffic flows (MAC address, IP address, VLAN tag, MPLS tag)
Test Patterns: user defined
Frame sizes: length 48 to 1518 bytes or Jumbo frame (up to 9600B)
Frame rate 0% to 100% bandwidth utilization with steps of 0.01%
Traffic shaping: Constant, ramp, or burst
IEEE1588:
Mode: Master/Slave, Master only, Slave only
Transport: Ethernet, UDP
Delay mechanism: End-to-End, Peer-to-Peer
Master Info: IP, Clock ID, Clock Class, Priority 1, Priority 2
Measurements: Offset from Master, M to S Delay, S to M delay, Mean
Path Delay, Round Trip Delay, Path Asymmetry, Clock Drift
Metrics: Sync (IPDV, PDV, IPG), Delay Req (IPDV, PDV, IPG)
Errors: Domain Mismatch, Sequence Mismatch, Version Mismatch,
Message Format Error, Delay Mode Error
Messages: General and Event, Count, Rate, Captture and decode
Results view: graphs, histograms, tables